10A
-
21
ENGINE AND LOWER ENGINE ASSEMBLY
Engine/gearbox assembly
L90, and K7M, and 710
10A
Disconnect fan assembly connector (8).
Unhook the electrical harness from fan assembly (9).
Disconnect connector (10) of the power assisted
steering pressure switch.
Remove the power assisted steering pipe mounting
bolts:
- from the top of sub-frame (11),
- on the multifunction support,
- on the rear of the cylinder block.
Disconnect:
- the low pressure hose on the power assisted stee-
ring pump and drain the circuit,
- the high-pressure pipe from the power assisted
steering pump,
- the high-pressure pipe from the steering rack.
Remove the power assisted steering high-pressure
pipe.
DIRECTION ASSISTEE, and BASIC HEATING
109398
109397
9
8
10
107924
11