Loftek CXS 2200 User Manual
8
1) In the diagram, IP Camera-1 and IP Camera-2 are connected separately to 2
different LANs.
2) These 2 LANs are already connected to the Internet. They consist of a router and a
modem provided by the Internet Service Provider (ISP) and are connected via ADSL
or optical fiber, etc. Consult your ISP for information on setting up a LAN.
3) In the example, PC-3 is connected to the Internet for remote viewing and control.
4.2
4.2
4.2
4.2 Accessing
Accessing
Accessing
Accessing the
the
the
the Camera
Camera
Camera
Camera
After ensuring the camera is connected to your LAN and powered on, you will be able to
start viewing your camera after a quick setup. Please select from the following two
options.
1)
The
The
The
The PC
PC
PC
PC and
and
and
and IP
IP
IP
IP Camera
Camera
Camera
Camera are
are
are
are in
in
in
in the
the
the
the same
same
same
same LAN.
LAN.
LAN.
LAN.
If you want to use the PC to access
the IP Camera, you need ensure the IP addresses are in the same segment. If not,
the camera’s IP address will have to be reset. For example, the IP Camera-1’s IP
address in Figure 5 is 192.168.1.139 (at the segment of 192.168.1), while the PC-1’s
IP address is 192.168.0.175 (at the segment of 192.168.0). IP Camera-1’s IP
address must be changed to 192.168.0.139 firstly, in order to match the segment of
PC-1.
2)
The
The
The
The PC
PC
PC
PC and
and
and
and IP
IP
IP
IP Camera
Camera
Camera
Camera are
are
are
are in
in
in
in different
different
different
different LANs,
LANs,
LANs,
LANs, but
but
but
but they
they
they
they are
are
are
are both
both
both
both connected
connected
connected
connected to
to
to
to
the
the
the
the Internet.
Internet.
Internet.
Internet.
For IP Camera-1 and PC-2 in Figure 5, to access IP Camera-1 from
PC-2, the user must first ensure that IP Camera-1 can be viewed from PC-1. Next,
router-1 must be configured to allow port forwarding. PC-2’s accessing application
can now be sent through router-1 to connect with IP Camera-1.
5
5
5
5 Viewing
Viewing
Viewing
Viewing the
the
the
the Camera
Camera
Camera
Camera Through
Through
Through
Through a
a
a
a LAN
LAN
LAN
LAN
5.1
5.1
5.1
5.1 IP
IP
IP
IP Address
Address
Address
Address Setup
Setup
Setup
Setup
The IP addresses of IP Camera and PC must be at the same IP segment. In Figure 5,
the IP
Camera-1 must be configured to match the PC’s segment. Run the
BSearch_en.exe program in the included CD, click the search button, then select IP
Camera-1 to reset the IP address, as shown in Figure 6.
Setup
Setup
Setup
Setup Instructions:
Instructions:
Instructions:
Instructions:
1) Check the “Local PC information” on the top left corner, which shows the PC
configuration. If there are multiple network adapters in the PC, please select the one
you are using and ensure the IP address of the IP Camera is in the same segment as
the PC.
