Loftek CXS 2200, User Manual

Page: 15 / 26

Loftek CXS 2200 User Manual
15
Figure 14
Note: When the device is connected to both WIFI and a cable, it will first connect to the
wired network. If a link cannot be established, it will open the wireless connection. The IP
address and port are the same for both connections.
7.1.3 7.1.3 7.1.3 7.1.3 ADSL ADSL ADSL ADSL Settings Settings Settings Settings
The ADSL Dialup box is set up as shown in Figure 15. (User name is password is
provided by your ISP). Connect the device directly to the ADSL modem and it is
connected to the Internet, without the need for port forwarding.
Figure 15
7.1.4
7.1.4
7.1.4 7.1.4 UPnP
UPnP
UPnP UPnP Settings
Settings
Settings Settings
UPNP stands for universal plug and play. With UPNP enabled, once the IP camera is
connected to the LAN, it will automatically communicate with the router. It will request the
router to open a port to forward its own port and it is not necessary for users to log into
the router to set the port forwarding.
Figure 16
Before using the UPnP function, please make sure the router’s UPnP function has been
activated. Note that not all routers support UPnP.
7.1.5
7.1.5
7.1.5 7.1.5 DDNS
DDNS
DDNS DDNS Settings
Settings
Settings Settings
Please refer to the content in section 6.2.