Loftek CXS 2200, User Manual

Page: 16 / 26

Loftek CXS 2200 User Manual
16
7.1.6 7.1.6 7.1.6 7.1.6 MSN MSN MSN MSN Settings Settings Settings Settings
Figure 17
To use the MSN feature, input the MSN account user name and password as shown in
Figure 17, and add a list of MSN contacts. When the device is online, it will show up on
the contacts’ MSN. Upon sending a message with the content: “url?” to the device’s MSN
the device will reply to the contact with its WAN IP Address, allowing the contacts to
access the camera.
7.2 7.2 7.2 7.2 Alarm Alarm Alarm Alarm Settings Settings Settings Settings
7.2.1 7.2.1 7.2.1 7.2.1 Alarm Alarm Alarm Alarm Settings Settings Settings Settings
1 1 1 1
）
Alarm Alarm Alarm Alarm Detection Detection Detection Detection
Motion detection can monitor a certain area; if any movement occurs in the selected area,
the alarm will activate. The smaller the value in the sensitivity setting, the less movement
is required to active the alarm.
As shown in figure 4, if an external alarm detector is connected to the device, the user
will be able to select from an always open or always closed switch alarm type.
2
2 2
2
）
Alarm
Alarm Alarm
Alarm Action
Action Action
Action
After the alarm is triggered, the camera can proceed with several procedures.
�
IO interface for alarm signal output: When the relay is switched on (please refer to
figure 3), the external alarm will activate.
� Email notification
�
FTP picture upload
�
Alarm server