20
Triple Ring
3500 (inox) - 3700 (glass)
24 - 26 cm
Notice
- When the equipment is not working, always check that the knobs are in the closing position
(see fig.1).
- If the flame should blow out accidentally, the safety valve will automatically stop the gas
supply, after a few seconds. To restore operation, set the knob to the lighting point (large flame,
fig.1) and press.
- While cooking with fat or oil, pay the utmost attention as these substances can catch fire
when overheated.
- Do not use sprays near the appliance in operation.
- Do not place unstable or deformed pots on the burner, so as to prevent them from overturning
or overflowing.
- Make sure that pot handles are placed properly.
-
When the burner is started up, check that the flame is regular and, before taking pots away,
always lower the flame or put it out.
2.2 CLEANING
Before any operation, disconnect the appliance from the electric grid. It is advisable to clean
the appliance when it is cold.
Glass platform and enamelled parts
The glass platform and allof the enamelled parts must be washed with a sponge and soapy
water or with a light detergent.
Do not use abrasive or corrosive products.
Do not leave substances, such as lemon or tomato juice, salt water, vinegar, coffee and milk on
the enamelled surfaces for a long time.
Burners and racks
These parts can be removed to make cleaning easier.
The burners must be washed with a sponge and soapy water or with a light detergent,
wiped well and placed in their housing perfectly. Make sure that the flame-dividing ducts are
not clogged.
Check that the feeler of the safety valve and the start-up electrode are always perfectly
cleaned, so as to ensure an optimum operation.
The racks can be washed in the dishwasher.
Gas taps
The possible lubrication of the taps must be carried out by specialized personnel, exclusively.
In case of hardening or malfunctions in the gas taps, apply to the Customer
Service.