Loepfe YarnMaster Zenit, Instruction Manual

Page: 50 / 83

50 ZENIT
YARN STRUCTURE
Setting Examples
(Standard Values)
Channel
Cotton and blended yarns short-staple
Insensitive setting N=6 DS=2.6 LS=1.6 DL=1.32 LL=60 -D=29% -L=70
Sensitive setting N=5.5 DS=2.2 LS=1.4 DL=1.26 LL=50 -D=22% -L=50
Very sensitive setting N=4.5 DS=2.1 LS=1.3 DL=1.20 LL=40 -D=17% -L=32
Long-staple yarns
Insensitive setting N=6 DS=2.6 LS=2.3
DL=1.30 LL=60 -D=30% -L=70
Sensitive setting N=6 DS=2.2 LS=2.0 DL=1.22 LL=50 -D=23% -L=60
Very sensitive setting N=5.5 DS=1.9 LS=2.5 DL=1.19 LL=45 -D=18% -L=60
Splice
Sensitive setting N=OFF DS=2.2 LS=1.6
DL=1.30 LL=12 -D=OFF -L=70
CheckLen Splice = 25 cm
Very sensitive setting N=OFF DS=2.2 LS=1.3 DL=1.25 LL=12 -D=20% -L=70
CheckLen Splice = 25 cm
SFI / D
Insensitive setting Limit +/– 30%
Sensitive setting Limit +/– 25%
Very sensitive setting Limit +/– 20%
VCV
Insensitive setting Limit +/– 30%
Length 50 m
Sensitive setting Limit +/– 25% Length 20 m
Very sensitive setting Limit +/– 20% Length 10 m
Cluster Short / Long / Thin
Possible setting Short Long Thin
Diameter DS 1.34 DL 1.12 -D -8%
Length LS 1.60 cm LL 16 cm -L 16 cm
Obs. Length 20 m 12 m 12 m
Faults 55 25 25
If, at the Observation Length of 20 m, the number of Faults is exceeding 55,
the respective spindle will be blocked.
Setting for detection of a defective top roller:
Diameter DS 1.33
Length LS 1.30
Obs. Length 20 m
Faults 170