Loepfe YARNMASTER 3N1, Fitting Instruction

Page: 9 / 30

9
3N1
SYSTEM SPECIFICATIONS
Introduction
Warning:
Switch off all the power sources from the machine and make sure it has come to a standstill before
starting the installation or servicing. Follow the safety instructions in the machine’s technical documentation.
About this Manual
This manual applies to the standard Loepfe 3N1 ready quality control system 1 for RIFA RS40 rotor spinning frames. In this
manual, quality is abbreviated as Q, foreigner fibre as FF and polypropylene as PP.
This manual has been written for software A700909 V8.08.
Parts List
LOEPFE Description Quantity RIFA
LOEPFE Description Quantity
A250423500 SCU and Software Basic 1 per machine
A250437100 SE for 48 units Basic 1 per 2 sections
A905257100 SH for 24 Untis Basic 1 per section
Principle
Machine Head First Section Last Section
SE LOEPFE SE LOEPFE Empty Electronic Board
RIFA PLC Controller
Power
SCU
n-11 n 1 24
1 24
n-11 n
 
 
Ground
LAN-Communication