25
3N1
SERVICE
Replacing a SE-Board
Part number: A250437100
1. Remove the two SE-unit cover screws.
2. Unplug the power connection and then all connections.
3. Hook the unit off the mounting frame.
4. Remove the five screws and take out the board.
5. Copy the address DIP switches settings.
6. Hook the unit on the mounting frame.
7. Reinsert all connections and finally the power cable.
8. Close the SE-unit.
Note:
The software is automatically sent to the SE-Board
by the SCU.
Replacing a Detector
Part number: A905257100 (basic), A905257000 (full)
1. Lock the spinning unit.
2. Disconnect the detector cable.
3. Loosen the two nuts and washers.
4. Mount and connect the new detector.
5. Unlock the spinning unit software
Spare Part Numbers
Loepfe
Description
A016964900
Cleaning Tips
A250423500
SCU basic
A250437100
SE board basic
A701000
extension print for SE (Full Version)
A905257100
Sensor basic
A905257000
Sensor full
V314103
Fuse for SCU
A080992900
Fuse for SE
P222004
Battery for SCU
A016957900
Battery for SE
045757000
USB Stick Loepfe
Summary of Contents for YARNMASTER 3N1
Page 1: ...YARNMASTER 3N1 46376003en Fitting Instruction RIFA RS40...
Page 2: ......
Page 4: ...4 3N1 INHALTSVERZEICHNIS...