26
3N1
SOFTWARE SETUP
Software
SCU Software Upgrade
Upgrade Procedure by Means of a USB Memory Stick
1. Take the “Open End VX.XX Build XXXXXX Upgrade.exe” file from the data carrier
2.
In special case:
Rename the file “Open End V7.02 Build 081024 Upgrade.oxo” to “Open End VX.XX Build XXXXXX Up-
grade.exe”.
3. Make sure there is no “BARCO” directory on top of the memory stick. In case there is one, copy this temporarily to your
hard disk or rename it, but remove it from the memory stick. Best Case: take an empty USB stick
4. Copy the file “Open End VX.XX Build XXXXXX Upgrade.exe” to the memory stick (on top).
5. Double-click the file “Open End V7.02 Build 081024 Upgrade.exe”, and unzip (or extract) it. This will create a “BARCO”
directory on top of the memory stick, containing all required files and folders for the upgrade.
6. Now, plug the memory stick into the SCU, and after 10 to 15 seconds the following screen will appear:
7. Click the “Next >” button, and a new screen appears:
Summary of Contents for YARNMASTER 3N1
Page 1: ...YARNMASTER 3N1 46376003en Fitting Instruction RIFA RS40...
Page 2: ......
Page 4: ...4 3N1 INHALTSVERZEICHNIS...