28
3N1
SOFTWARE SETUP
Software for Section Electronic (Q-Board)
Change Procedure for the 2 Flash EPROM Units
1. Stop production of the OE Spinning machine
2. Switch off the Power of the SCU
3. Open the cover of the SCU (2 screws)
4. Replace the old flash EPROM with then new one. (use a special gripper)
L (Low) for U23, left side
H (High) for U24, right side
5. Switch on the Power of the SCU
6. Go to menu: service / machine configuration and press button QB program (for programming the section electronic).
Summary of Contents for YARNMASTER 3N1
Page 1: ...YARNMASTER 3N1 46376003en Fitting Instruction RIFA RS40...
Page 2: ......
Page 4: ...4 3N1 INHALTSVERZEICHNIS...
