Control and Operation, cont.
4
9
4.2
ILLUSTRATION OF CONTROLS
20.0
CYCLE TIMER
7215
P/N 98007
READ OPERATOR'S MANUAL BEFORE USE
prevent user exposure to UV light.
This unit has been designed to
ULTRAVIOLET LIGHT
WARNING
CYCLE TIMER
CYCLE START
CYCLE STOP
ON
OFF
CHAMBER POWER
LAMP POWER
CONTROL POWER
OFF
ON
OFF
ON
BEFORE CLEANING, SERVICING OR RELAMPING,
OR LAMP SHIELDING PROVIDED WHEN LAMP IS IN USE.
SUITABLE EYE AND SKIN PROTECTION MUST BE WORN
NOT EXPOSED TO DIRECT OR REFLECTED RADIATION.
MUST BE TAKEN TO INSURE THAT PERSONNEL ARE
WHICH IS HARMFUL TO EYES AND SKIN. GREAT CARE
ULTRAVIOLET IRRADIATORS EMIT RADIATION
ALWAYS TURN THE POWER OFF.
CAUTION
P/N 984132
STANDBY MODE
MAIN POWER
HIGH MODE
ELAPSED TIME
Timer Set
Programs new time setting
after making changes.
Move to next digit on left,
wrap around at far left.
20.0
➡
20.0
20.0
➡
20.1
Increment digit up by 1
Not Used
Figure 7. Cycle Timer
Figure 6. Power Supply
Figure 5. Cure Chamber
If you step more than six digits to the left of the decimal
point, a minus appears. Continue to step (Do not hit the red
program button) and the selection will go back to the digit
two places to the left of the decimal point. If someone does
select the minus, it can be corrected by going back to the
minus and hitting the program (red) button to toggle the
minus off. You then can program the desired time normally.
984135 Zeta 7215 & 7216 manl 8/3/00 3:24 PM Page 11
