22
Control and Operation, cont.
4
4.2
ILLUSTRATION OF CONTROLS
20.0
CYCLE TIMER
7216
P/N 98008
WARNING
ULTRAVIOLET LIGHT
This unit has been designed to
prevent user exposure to UV light.
READ OPERATOR'S MANUAL BEFORE USE
CHAMBER POWER
OFF
ON
CYCLE STOP
CYCLE START
CYCLE TIMER
+
-
+
-
SYSTEM
UNIT
LAMP CONTROL
INDICATOR TEST
STANDBY
/RESET
LAMP OFF
LAMP ON
LAMP OUT
PWR IMBAL
SYS BLWR
EXT INTLK
RF INTLK
PWR ERROR
BLWR PRESSURE
PS TEMP
PHOTOCELL
TEST POINTS
(0-12 VDC)
P300M POWER SUPPLY
TEST POINTS
MAGNETRON
(0-800 mVDC)
POWER
O
I
Timer Set
Programs new time setting
after making changes.
Move to next digit on left,
wrap around at far left.
20.0
➡
20.0
20.0
➡
20.1
Increment digit up by 1
Not Used
Figure 13. Cycle Timer
Figure 12. Power Supply
Figure 11. Cure Chamber
If you step more than six digits to the left of the decimal
point, a minus appears. Continue to step (Do not hit the red
program button) and the selection will go back to the digit
two places to the left of the decimal point. If someone does
select the minus, it can be corrected by going back to the
minus and hitting the program (red) button to toggle the
minus off. You then can program the desired time normally.
984135 Zeta 7215 & 7216 manl 8/3/00 3:24 PM Page 24
