background image

 

 

9.0

 

WARRANTY 

 

Models

 

Warranty Period

 

Maximum working temperature/pressure

 

All models 

Vessel 

2 years 

Maximum  working  temperature/Pressure  within  the  Vessel: 
95°C/5Bar 

Other 

Components 

1 year 

 

General Warranty  

Our warranty is to provide a replacement component in exchange for the return of the defective component and is 
subject to an audit upon receipt of the faulty component. Replacement components must be paid for in full prior to 
dispatch unless we agree otherwise. The warranty does not include any labour costs or carriage of the returned 
component. If (after verification and at the sole discretion of Lochinvar Limited) a component or part of the LBT Thermal 
store 
supplied by Lochinvar Limited proves, within 24 months from the date of delivery of the original appliance to be 
defective or fails to function correctly due to manufacturing and/or material defects, then Lochinvar Limited shall repair or 
replace this component or part.  
 

Conditions for installation and use  

The warranty set out above will apply solely under the following conditions:  
a)

 

The warranty is subject to the LBT Thermal store being installed, and maintained in accordance with the relevant 
Installation Commissioning and Maintenance Instructions and does not cover failures due to deliberate misuse, 
malicious damage, neglect, unauthorised alterations or repairs, accidental damage or third party damage.  

b)

 

The LBT Thermal store remains installed at the original site of installation.  

c)

 

Working temperature must be no greater than 95°C, and MWP pressures must not exceed the figures given in the 
table above. 
 

Exclusions  

The warranty set out above will not apply in the event of damage to the LBT Thermal store caused by an external factor 
such as:  
a)

 

Damage occurring during transport, lifting or installation. 

b)

 

Misuse, neglect (including frost damage), modification, incorrect and/or unauthorised use of the LBT Thermal store 
and any attempt to repair leaks;  

c)

 

Contaminants or other substances having been allowed to enter the LBT Thermal store  

d)

 

Unfiltered, recirculated water flowing through the LBT Thermal store 

e)

 

Any fault arising due to inadequate water quality or insufficient cleansing of the heating system is not covered by the 
warranty.  

 

 

Scope of the warranty  

The obligations of Lochinvar Limited by virtue of the warranty provided do not extend beyond delivery free of charge from 
the warehouse of the parts or components of the LBT Thermal store to be replaced; transport (including crane hire), 
labour, installation and other costs associated with the replacement shall not be borne by Lochinvar Limited.  
 
 
 
 
 
 
 
 
 
 

Summary of Contents for LBT Series

















Reviews: