3
1. SAFETY
Followings are safety items to handle this tool.
1.1 WARNING
SIGN
This manual includes warning signs shown below to protect users from possible injuries or
damages to properties. There are different signs depending on the level of potential damage in
case of negligence. For safety, follow the instructions by all means.
Warning Sign
Descriptions
Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may
result in moderate injury.
Indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
This sign emphasizes important or beneficial information.
1.2 SAFETY
CONCERNS
■
Connect the tool and air source firmly.
Mismatched pipe arrangement in the joint screw and/or insufficient fitting length may give
air hose disconnection to cause injury.
When the auxiliary air hose joint is used, connect it firmly with a hose band so that the air
hose should not be disconnected.
■
Confirm no damages in each part. If you see any damage, repair or replace it.
If you use the tool without repair, the damaged area may be broken and may cause injury. If
something falls on the tool and air hose is damaged, the damaged area may be broken and
may cause accident or injury.
■
■
■
■
Keep the air pressure between 0.49 and 0.59 Mpa (5 to 6 6kgf/cm
2
).
Exceeding the air pressure limits may result in possible damage to the tool to cause injury.
■
Always use the tool with the tank unit. During use, wear safety glasses.
Cut rivet shafts may be blasted off and may cause injury.
1.
1.
1.
1.
Safety
