LOBSTER R2B1, Instruction Manual

Page: 17 / 35

ENGLISH
17
LED lamp lighting condition
Contents of indication
Red Green
-
Blinking
(low speed)
Standby for charging (charger is energized)
Lit - Charging in progress
-
Blinking
(high speed)
Completion of practical charging (completion
of 80% charging, full charging in progress)
- Lit Full charging completed (charging completed)
Blinking
(low speed）
-
Charging is suspended due to a temperature
out of appropriate temperature range
Lit Lit Charging disabled (abnormal state)
⚠ CAUTION
When the temperature of the battery pack is high or low, it will not be charged to
protect the battery pack. When the temperature of the battery pack enters the
appropriate range, charging starts.
Charge the battery in the ambient temperature range of 0 to 40℃ .
１
3
When the charging is completed, remove the battery pack from the charger, and
disconnect the power plug from the receptacle.
Rivet body
diameter
Battery pack 2,0 Ah
(typical)
Battery pack 4.0Ah
(Optional)
φ 2.4 1400 2800
φ 3.2 1200 2400
φ 4.0 1000 2000
φ 4.8 900 1800
Number of fasteners
This is the number of units that can be tightened continuously when the
battery pack is fully charged.
The number of fasteners is approximate.
It varies depending on the rivet used, the base material specification,
and the condition of the battery pack.
[pcs.]