ENGLISH
19
Lightly press the tip of the riveter against the base material, and after
confirming that there is no clearance from the base material and other
object, pull the trigger switch.
１
6
The body of the blind rivet is riveted to the base material.
１
7
Tilt the riveter backwards, release the trigger switch, and
discharge the cut mandrel to the mandrel collector or to
the outside.
The cut mandrel may protrude from the nose piece tip, but this
is not a malfunction.
Remove the protruding mandrel and continue the work.
１
8
⚠ CAUTION
Move on to the next riveting after the mandrel is reliably ejected.
If mandrels remain on the top of the mandrel collector, shake the riveter gently to
drop it to the bottom.
mandrel
Summary of Contents for R2B1
Page 28: ...ENGLISH 28 Parts table Parts table 1 2 3 4 5 14 6 7 8 9 10 11 12 13 ...
Page 33: ...ENGLISH 33 ＭＥＭＯ ...
Page 34: ...ENGLISH 34 ＭＥＭＯ ...
Page 35: ...ENGLISH 35 ...
