ENGLISH
22
①
②
● Points of Maintenance and Inspection
● Points of Maintenance and Inspection
● Cleaning of interior of frame head
１
1
Remove the battery pack from the machine body.
While pressing down the button ( ① ), slide the battery pack ( ② ).
When riveting has been performed for long hours, mandrel chips and dirt get accumulated
in components, possibly causing a problem. Periodically clean the components by
following the instructions in this document.
When chips are accumulated, the smoothness of the jaw is lost, and it becomes
impossible to work normally. Clean this machine once in riveting of 2,000 rivets as a
guide.
⚠ CAUTION
When disassembling this machine for servicing, part replacement, and other purposes,
be sure to remove the battery pack. When servicing or disassembly is performed with
the electric power supplied, parts may spring out or an electric shock, unexpected
movement, or the like may occur, possibly causing an accident or injury.
Do not operate this machine with the frame head dismounted. Failure to follow this
instruction may cause an injury such as pinching of fingers.
１
2
Remove the frame head nut (right-hand thread) by loosening it (1), and then
remove the frame head (2).
Frame head nut
Frame head
Disassembly
Button
①
②
*
Also refer to this section
for replacement of
replacement parts.
Summary of Contents for R2B1
Page 28: ...ENGLISH 28 Parts table Parts table 1 2 3 4 5 14 6 7 8 9 10 11 12 13 ...
Page 33: ...ENGLISH 33 ＭＥＭＯ ...
Page 34: ...ENGLISH 34 ＭＥＭＯ ...
Page 35: ...ENGLISH 35 ...
