LOBSTER R2B1, Instruction Manual

Page: 16 / 35

ENGLISH
16
● Procedures for charging ● Procedures for charging
１
１
Connect the power cable to the charger ① and insert the power plug into a receptacle
② . When the charger is energized, the green LED lamp slowly blinks.
For charging of the battery, be sure to use the dedicated charger.
⚠ CAUTION
This charger can be used with AC 100V to 240V.
Do not use the charger by connecting it to a DC power source or an engine power
generator.
1 ---
---
コンセント差し込み
1:2 ---
参考）単重量 152.86g
株 株式 式会 会社 社ロ ロブ ブテ テッ ック クス ス
120をこえ 400以下
20℃・65％・101.3kPa
普通公差 JIS B 0419-mH
寸法公差
0.5
0.3
0.2
0.1
中級±
呼び区分
0.5以上 6以下
6をこえ 30以下
30をこえ 120以下
公差表示方式JIS B 0024
図番
表面処理
承認 製図 設計
CODE
制定日付
硬度
材質
尺度
個数
品名
検図
Receptacle
Charger
Power cable
Power plug
①
②
LED lamps
１
2
Positively insert the battery pack all the way to the back of the charger. When the
battery pack is inserted to the back, the lighting condition of the LED lamps changes.
The contents of indications of the LED lamps are as shown in the following table.
Battery pack
Charger
LED lamps
(green, red)