LOBSTER R2B1, Instruction Manual

Page: 13 / 35

ENGLISH
13
株式会社ロブテックス
RC-R2B1-A-0501-0
保持ノーズピース48Oユニット
68418
2:1
田沢
1 ---
---
---
製図 設計
CODE
制定日付
硬度
材質
尺度
個数 品名
図番
表面処理
承認 検図
寸法公差
0.5
0.3
0.2
0.1
中級±
呼び区分
0.5以上 6以下
6をこえ 30以下
30をこえ 120以下
120をこえ 400以下
20℃・65％・101.3kPa
普通公差 JIS B 0419-mH
公差表示方式JIS B 0024
参考）単重量 5.43g
● Preparation before Use ● Preparation before Use
１
１
Charge the battery pack before using this machine. (Refer to page 16.)
１
2
Replace the parts (nose piece, jaw pusher unit) in
accordance with the size of the blind rivet in use.
(Refer to page 22.)
⚠ CAUTION
Do not work with the wrong combination of parts even when a blind rivet can be
inserted. Failure to follow this instruction may cause a failure or accident.
Rivet size
(rivet diameter) [mm]
Marking on nose piece
and jaw pusher unit
φ 2.4 2.4
φ 3.2 3.2
φ 4.0 4.0
φ 4.8 4.8
Nose piece Jaw pusher unit
Size marking
Rivet diameter
Body
Mandrel
It is possible to use standard blind rivets in various sizes only by replacing the nose piece
and jaw pusher unit.
The product comes with the nose piece and jaw pusher unit for φ 4.8 size at the time of
purchase.
１
3
Check for foreign objects in the mandrel collector.
While pushing down the lever of the mandrel collector ① , turn it down and remove it ② .
Then, make sure that nothing is in the mandrel collector.
⚠ CAUTION
If the mandrel collector is used with some foreign object left in it,
the discharge of mandrel may be obstructed, which may cause the riveter to fail.
Machine body
Mandrel collector
Lever
②
①