Cleaning the spool
1
2
3
Turn off the air supply.
Use a spanner or similar tool to
remove the change plugs at the
front and back.
Use a plastic screwdriver or similar
to push out the spool from the rear
hole.
t
CAUTION 1 (P.3)
D
IS
A
SS
EM
B
LY
3
4
Use a brush or similar to clean all
parts. Check the spool thoroughly
to ensure that none of the small
holes in the spool are blocked.
C
L
E
A
N
IN
G
R
E
-A
S
SEM
B
LY
5
Reassemble by following the
disassembly procedure in reverse.
A
Apply grease to the O-ring of the spool
before reassembly.
A
The front and rear change plugs and
the change plug of the air hose
connector (refer to page 5) have the
same shape, so be careful not to
confuse them.
Front
Rear
Rear
Spool
Change plugs
Check for any blocked holes
13
英語／E
N
G
L
ISH
AR-2000S-M-H(A)取扱(GB):AR-2000S̲M-H(A)取扱(GB) 14/08/27 13:55 ページ 13
