81
61
R
E
-A
S
SEM
B
LY
5
AR2000S
(A)
Reassemble by following the disassembly procedure
in reverse. Install the jaw case so that its distance
matches those shown in the illustration at right.
AR2000M
(A)
/AR2000H
(A)
Reassemble by following the disassembly procedure in
reverse. Tighten the jaw case head fully, and then turn
it back so that the notch is aligned with the tab on the
jaw case collar, and move the collar into place.
A
Apply “LOBSTER” brand jaw lube (sold separately)
to the backs of the jaws.
Apply jaw lube •
(lubricating oil)
Lower the jaw case collar
Align the notch
＜
Jaw case setting position
＞
61
10
英語／E
N
G
L
ISH
NOTE:
¡
When re-assembling, be sure to apply a lubricant
such as grease to all moving and sliding parts.
¡
Be careful not to leave out any parts, and tighten all
connections securely.
¡
The jaws are consumable parts, and they should be
replaced periodically.
¡
In the case of the AR2000M
(A)
and AR2000H
(A)
, the
jaw case and jaw case lock nut do not need to be
removed during maintenance. If they are removed
by mistake, replace them so that the distance
matches those shown in the illustration at right.
AR2000M
(A)
AR2000H
(A)
＜
Jaw case setting position
＞
AR2000S
(A)
AR-2000S-M-H(A)取扱(GB):AR-2000S̲M-H(A)取扱(GB) 14/08/27 13:55 ページ 10
