LNS ITALIA s.r.l. Instruction manual series SC 500 page 3 di 21 –
05-2014
1. General information
1.1. Contents and symbols
Dear customer, this manual contains all the indications and suggestions necessary for the installation, use and
maintenance of SC series
part spray cabin
.
The indications in this manual can be divided into:
A) Regulations on
Personal Safety
Partial or total non-compliance with these regulations may pose a serious hazard to the safety or
health of exposed persons
B) Regulations on
Unit integrity
Partial or total non-observance of these regulations may result in damage to the unit and/or other
machines connected to it
C) Other indications and
Notes
of particular importance
Notes of particular importance that are not included in the two previous classifications
1.2. Safety
Before operating the unit described below, we ask that you carefully read this manual, paying particular attention to all
the Regulations on
personal safety
and unit integrity
This unit was designed and produced in compliance with the following European Community safety directives:
·
Machine directive 2006/42/EEC
·
Low Voltage Directive 2006/95/EEC
·
Electromagnetic Compatibility Directive 2004/108/EEC
In compliance with the safety directives, each
residual risk
identified during the risk analysis has been inserted and
highlighted in this document.
Specific hazard and/or warning labels have been placed on the unit for additional safety.
“Personal safety – unit integrity”
LNS ITALIA is not liable for any damage to things or injuries to persons caused by non-
observance of any safety regulations.
1.2.1 Information label description and placement
A
Label
that
emphasises
the
importance of
reading
the
instruction
manual
where
the
main
safety
warnings
on
electric
and
mechanical
risks can be
found.
B
Serial number label which, in
addition to identifying the machine,
contains data on: weight, power,
electric current draw and air flow
rate.
C
Label with filtration data for the
main filter cartridge
D
Label
indicating
the
impeller
rotation direction
E
Label:optical sensor for start
F
Label: max load on lateral tray
(8kg)
Fig. 1a Main warning labels
