15
x
JOG
- This mode will allow the operator to jog the Rotating Tube, Contact Cylinder (Front
Seal) and the blower vacuum.
CHANGING MODES:
To change modes, press the
MENU
function key.
Press the
ENTER
function key when ‘MODE select’ is displayed.
Use the ‘
up arrow
’ and ‘
down arrow
’ function keys to index through the three different modes.
Press the
ENTER
function key when the desired mode is displayed.
Now the top line will display the currently active mode
( OFF, AUTO MODE, or JOG MODE)
Also accessible from the operator control station are SETUP Parameter variables and
INFORMATION (see
Sections 5.6 & 5.7
). These will not need to be changed for normal
operation.
Summary of Contents for Blaze Air
