LNS Alpha 538, Instruction Manual

Page: 79 / 115

CHAPTER 8: OPERATION 8-4
ALPHA 538/552
+
Slow Rightward
Move the pusher rightward with10% of the general forward speed.
Only available when the bar feeder is in
MANUAL
mode.
Leftward
Move the pusher leftward. Only available when bar feeder is in
MANUAL
mode.
+
Slow leftward
Move the pusher leftward with10% of the general forward speed.
Only available when the bar feeder is in
MANUAL
mode.
Open Channel
By pressing this button, the channel opens by proceeding sequence
below automatically :
·
The short pusher moves forward to the material clamping
device.
·
The material clamping device clamps the material and the
pusher retracts hence the material is removed from the finger
chuck.
·
The channel opens.
To operate this button, the following conditions must be fulfilled :
·
The bar feeder is in
MANUAL
mode
·
The pusher is at home position (sensor SQ2 ON)
Load bar
When the channel is open, press the key again to load a bar and
reset the measurement device.
Close Channel
By pressing this button, the actions below will be proceeded by
sequence automatically :
·
The short pusher moves forward to the material clamping
device.
·
The material clamping device clamps and the pusher retracts
to home position.
·
Channel close and the pusher charges forward for insertion.
To operate this button, the following conditions must be fulfilled:
·
The bar feeder is in
MANUAL
mode
·
The pusher is at home position (sensor SQ2 ON)