LNS Alpha 538, Instruction Manual

Page: 62 / 115

CHAPTER 7: OPERATION 7-3
ALPHA 538/552
1.3. Setting the bar selection
The setting of the loading diameter is done manually, by
setting the loading ramp handle to the correct diameter:
1. Unlock the side handle (
A
) completely, so that the setup
handle (
B
) can be moved.
2. Move the setup handle (
B
) to the desired diameter
range, corresponding to the bar stock diameter to be
loaded.
3. Lock the side handle (
A
) completely, so that the setup
handle (
B
) cannot be moved.
A
B