62
7.2.6
Group Setup
A scan 3x00 server can support
Top
and/or
Bottom
sensor groups. For each
group in the device tree, click the group’s device tree node and enter the settings
described in the following sections.
7.2.6.1 Group Sections Tab
The
Group Sections
tab, shown below, is used to divide the profile, vision, and tracheid
data within a
Top
or
Bottom
sensor group into lengthwise sections that can be
transmitted to attached Client devices in Web mode or Detection mode. To add a
section, click the
Add
button, and then enter the section parameters (described below).
Note:
if no vision sections are defined, vision cameras and lights (if present) will be
disabled, and if no tracheid sections are defined, tracheid cameras will be disabled. If no
sections of any kind are defined, profile cameras and lasers will remain enabled, but
Web mode or Detection mode will not produce any output messages.
Note:
each output section can be transmitted on only a single data channel. However,
output sections can overlap arbitrarily, limited only by network bandwidth and Station
CPU utilization.
Id
A user-defined identifier for this section. When using FireSync
Client, this field determines the index of the visualization tab in
which a section will be displayed.
Type
Profile, Vision, or Tracheid.
X0
Start of section along the x-axis (length), in system coordinates
(mils).
X1
End of section along the x-axis (length), in system coordinates
Summary of Contents for chroma+scan 3155
