E-mail support
LMI Corporation
Phone support
(810) 714-5811
It is recommended to assign simple user name to the gage files such as; flush, margin, etc. This
will help to identify different setups.
4.
To assign the gage file name, press
▲
or
▼
to highlight “G2”* in the “Gage List” and press
<enter> on the collector.
*G2 has the ability to support “sub files”. These are files that allow multiple styles or
configurations of gages to be used by the same collector. To create sub files highlight G2 and press
►►
, this will create a sub file of G2a. Each press of
►►
creates another sub file. The balance of
this instruction will be based on G2
5.
Use the
▲
,
►
,
◄
, or
▼
to highlight the first character of the new file name then press
<enter>, repeat the process until the gage file name is spelled. Then press
►►
to accept the
new name.
6.
Press the
►
to “Configure”, by
default the screen may read as
follows.
Form: CA 030
December 28,
2004
R:\Quality\Calibration Instructions\CA 030.doc
Page 3 of
13