LMI 241 Series, Configuration And Mastering Instruction, Page: 2 / 13

101 N. Alloy Dr.
Fenton, MI 48430 Ph (810) 714-5811
Fax (810) 714-5711
CustomerService@lmicorporation.com
Research, Development and Manufacturing of Precision Measuring Systems
I. GAGE CONFIGURATION
Section I is a one time setup. After a successful gage configuration is finished there should be no
need to repeat section I. It is recommended to store a copy of the gage files onto a personal
computer or laptop. Consult the collector manual or, if purchased, the TranSend manual for
further details.
Flush Setup
This configuration will produce a negative value for flush when the tip extends beyond the
nominal (master) point. To reverse the values enter -10 in step 10.
1.
Press <menu> to turn on the collector.
2.
Press ▼ to highlight “Gage”.
3.
Press <enter>.
Form: CA 030 1-4-05
R:\Quality\Calibration Instructions\CA 030.docR:\Quality\Calibration Instructions\CA
030.doc Page 2 of
13