21
2. Mounting the wall holder
Proceed as follows to mount the device:
• Slide down and remove the wall holder on the back of the
wireless thermostat.
• Place the wall holder vertically against the wall with the round
side pointing up, see figure 4.
• Mark the positions of the bores through the two slotted holes,
see arrows in figure 4.
• Depending on the type of wall, drill 6mm holes and insert
suitable dowels.
Figure 4
Make sure no electrical cables, gas or water pipes are damaged! Life-
threatening danger!
• Fix the wall holder into place using, for example, the enclosed screws. Make sure that the two
recessed slotted holes for the screws point in your direction.
• If you have not already done so, insert the batteries into the wireless thermostat (see section
6. a) before you slide it on to the wall holder.
• The wireless thermostat can now be slotted down on to the wall holder from above.
p
p
