48
16. Quick reference guide
• Insert the batteries (2xAA) into the wireless thermostat
• Set date and time
• Insert the wireless switching socket into a public power supply socket (230V/50Hz) with
protective earth conductor
• Press the ‘on/off’ control button on the wireless switch socket for at least 15 seconds until the
LED begins to blink, then release the button
• Briefly press the ‘on/off’ control button on the wireless switch socket; all wireless switch socket
settings are erased
• Program the house code and address of the wireless thermostat
• Press the ‘on/off’ control button on the wireless switch socket again for at least 15 seconds until
the LED begins to blink, then release the button; the wireless switch socket is now in program
mode
• Transmit the house code and address to the wireless switch socket
• The LED on the wireless switch socket goes out, the house code and address have been
received and saved
• Plug the consumer load into the socket of the wireless switch socket (observe the max. power
consumption of 3680W, 230V~/16A)
• Select the heating/cooling mode on the wireless thermostats (depending on whether a radiator
or a cooling appliance/ventilator is connected to the wireless switch socket)
• Program the desired switching times (or activate manual control using the ‘FUNKTION’ button,
‘Manu’ displayed)
When the wireless switch socket is switched on, the LED on the front side of the wireless switch
socket lights up.
