41
10. Operating the wireless switch socket
‘FS20 ST-2’
a) Switching the consumer on/off manually
The wireless thermostat
automatically
activates the wireless switch socket according to room
temperature, target temperature and hysteresis (this naturally also applies to any other integrated
FS20 remote switching components!).
If the consumer connected to the wireless switch socket is manually turned on
or off using the ‘
Ein/Aus
’ button (On/Off), the wireless switch socket will soon
after resume its automatic functions, as transmitted by the wireless thermostat
(according to room temperature, target temperature and hysteresis setting).
The same naturally also applies when a remote control of the FS20 wireless
control system is used.
It is therefore neither necessary nor possible to manually switch the consumer on or off,
as this is contradictory to the purpose of automatic control via a wireless thermostat.
The consumer connected to the wireless switch socket should only be operated
using the manual temperature setting function on the ‘FS20 STR’ wireless
thermostat.
Beginning in the wireless thermostat’s normal operating mode, press the
‘
FUNKTION
’ button repeatedly, until ‘
Manu
’ appears in the display.
Then set the desired temperature by turning the scroller.
Depending on the set room/target temperature and hysteresis, the wireless
thermostat shortly after transmits a corresponding switching command to the
‘FS20 ST-2’ wireless switch socket (and/or other FS20 remote switching compo-
nents).
The consumer is switched on or off.
