E-mail: [email protected]
Web: www.lkm-security.com
Sede Legale:
Lookathome s.r.l
Via dei campi, 127 - 22070 Binago (CO)
Tel. +39 0773284477 - P.IVA 03342730136 - Cap. Inv. Euro 5.000
Sede Operativa:
Lookathome s.r.l
Viale Corbusier, 327- 04100 Latina (LT)
Tel. +39 0773 1852943 E-mail: [email protected]
10 GSM Operation:
10.1 Answer Alarm Call
When alarm occurs, alarm panel will dial the pre-set number, If telephone-line and GSM network both normal,
alarm panel will prior to choose telephone network to dial preset phone number from Group 1-9 meanwhile sent
SMS to preset SMS phone number. If the
user‘s phone is busy or cannot be connected, the alarm system will
transfer to dial the next preset phone number till three cycles. User no need to enter password after received the
alarm call to play the record. Press the number keys on the phone to operate the corresponding control functions:
[1] key: Arm [2] key: Disarm
[3] key: Monitor [4] key: Stop Monitor
[5] key: Intercom
[6] key: Stop Intercom
[7] key: To make siren beep [8] key: Turn on siren beep
[9] Turn on relay-out put [0] Turn off relay-out put
[*] key: Hang up, system will not dial the next alarm number. The alarm system will continue
dial the next alarm phone No. if user do not press “*” or “2” number key.
Remark:
Intercom time is 20s, press 3 to intercom for another 20s.
10.2 Remote Phone Call Control
User can use telephone or phone to make a call to remote control the panel, panel will pick -
up the call automatically and then will have voice prompt "Enter Password" , then enter the
password (default password is "1234", it will remind the user to enter password again if
password is wrong. the alarm system will automatically hang up if the third time still enter
wrong password), the alarm system will remind the password is correct after entered correct
password, then user can press the below number keys on the phone to do control functions:
[1] key: Arming [2] key: Disarming
[3] key: Monitor
[4] key: Stop Monitor
[5] key: Intercom [6] key: Stop Intercom
[7] key: To make siren beep [8] key: Turn on siren beep
[9] Turn on relay-out put [0] Turn off relay-out put
[*] key: Hang up,
[#] key: Enter remote configuration mode, user can do status settings to the alarm host
according to instructions in instruction table. I
f no operation in 20s, it will hang up automatically.
10.3 Setting Command Via Keypad,Mobile Phone Call and SMS
Except WiFi App can set alarm system parameter, user also can through alarm panel touch
keypad, phone call and SMS to set. Command format are as below:
1. Touch keypad: Press
[#]+[ Command] to do setting, and then
press
[
* #
]
to exit setting
2.
Phone call: Call the SIM card number of the alarm system, input [Command] to do setting.
3. SMS: Send
[Password]
+
[Command]
to the SIM card number of the alarm system.
Notes: As for user use extension telephone which need dial a number then can dial out (such
as “9”), then need add “9*” before telephone no. For example send message
“1234319*13899998888#”
Command Table:
