E-mail: [email protected]
Web: www.lkm-security.com
Sede Legale:
Lookathome s.r.l
Via dei campi, 127 - 22070 Binago (CO)
Tel. +39 0773284477 - P.IVA 03342730136 - Cap. Inv. Euro 5.000
Sede Operativa:
Lookathome s.r.l
Viale Corbusier, 327- 04100 Latina (LT)
Tel. +39 0773 1852943 E-mail: [email protected]
►
Alarming:
Alarm light is on and screen shows “Zone Alarm”, for example 88 Alarm → 88
Zone is alarming.
Alarm light is off → No alarm occurs
►
WIFI Signal:
WIFI light flash
→ alarm panel WIFI has not initiated yet;
WIFI light is on
→ alarm panel WIFI has initiated;
►
Zone type :
Normal Zone
: The panel only works under arm and stay arm status, it is not working when
disarming.
Stay Zone
: When alarm panel is under stay arm status, the detectors under stay
zone will not alarm even it is triggered. (For example, a user installed a door contact in zone
1(Normal Zone), a PIR detector in zone 2 (Stay Zone), the user press “S” key of the remote
control, then the alarm panel is under Stay Arming Status. When the user walks around at
home, PIR detector will detect the movement of the human and send signal to alarm panel,
but it does not alarming; if the user opens the door in zone 1, the alarm panel will alert
immediately.
Intelligent Zone:
Alarm panel will not alarm if
the detectors in the Smart Defense Zone was
triggered only once, but if it was triggered again within 30 seconds after the first trigger, the
alarm panel will alert immediately.
Emergency Zone:
the detectors which under Emergency Defense Zone were triggered, then
the alarm panel will alert no matter is on arming or disarming status.
Close Zone:
No matter on arm or disarm status, detectors which under Close Zone will not
alert even being triggered.
