E-mail: [email protected]
Web: www.lkm-security.com
Sede Legale:
Lookathome s.r.l
Via dei campi, 127 - 22070 Binago (CO)
Tel. +39 0773284477 - P.IVA 03342730136 - Cap. Inv. Euro 5.000
Sede Operativa:
Lookathome s.r.l
Viale Corbusier, 327- 04100 Latina (LT)
Tel. +39 0773 1852943 E-mail: [email protected]
Door Sensor Two-way
ON/OFF
[0/1]: 0 means OFF,1 means ON. Default is OFF.
E.g. : Set door sensor two-way Alarm function ON
1. Press [#] on the keypad and then press [631
#
]
2. Remote calling the alarm panel, input [pa[#] to enter
setting status, then press [631
#
]
3. Send SMS message [1234631
#
]
Command
：
[63]+[0/1]+[#]
Alarm Panel AC
Power Disconnect
SMS Send ON/OFF
[0/1]: 0 means OFF, 1 means ON. Default is ON
E.g. : User need SMS send when AC power disconnect..
1. Press [#] on the keypad and then press [641#]
2. Remote calling the alarm panel, input [pa[#] to enter
setting status, then press [641#].
3. Send SMS message [1234641#]
Command
：
[64]+[0/1]+[#]
Wireless Siren
ON/OFF
[0/1]: 0 means OFF,1 means ON. Default is OFF
E.g. : User need connect wireless siren, please turn on.
1. Press [#] on the keypad and then press [671#]
2. Remote calling the alarm panel, input [pa[#] to enter
setting status, then press [671#].
3. Send SMS message [1234671#]
Command
：
[67]+[0/1]+[#]
SMS Sent ON/OFF
When Arm/Disarm
[0/1]: 0 means OFF,1 means ON
E.g. : SMS Sent When Arm/Disarm
1. Press [#] on the keypad and then press [681#]
2. Remote calling the SIM card number, input [pa[#] to enter
setting status, then press “681#”.
3. Send SMS message “1234681#”
Command
：
[68]+[0/1]+[#]
Reset
This command user for restore to factory settings (delete all preset
settings such as telephone No., delete alarm/arm delay, turn off
telephone line self-checking function, etc. Password turn to default
1234). But it will not delete remote control and detectors.
1. Press [#] on the keypad and then press [9898#]
2. Remote calling the alarm panel, input [pa[#] to enter
setting status, then press [9898#]
3. Send SMS message [12349898#]
Command
：
[9898 ]+[#]
Totally Reset
If user turned on keyboard password protection function and forgot its
password, user can only use force restore factory setting to reset.
Steps:
1. Disconnect AC power adapter, switch to OFF
2. Wait 1 min and then turn on the panel
3. Press “SOS” key immediately on the alarm panel keypad
4. Alarm panel will “beep, beep...”
after five seconds, release “SOS” key
After this operation, the panel is totally reset, all settings, remote
