E-mail: [email protected]
Web: www.lkm-security.com
Sede Legale:
Lookathome s.r.l
Via dei campi, 127 - 22070 Binago (CO)
Tel. +39 0773284477 - P.IVA 03342730136 - Cap. Inv. Euro 5.000
Sede Operativa:
Lookathome s.r.l
Viale Corbusier, 327- 04100 Latina (LT)
Tel. +39 0773 1852943 E-mail: [email protected]
Command
：
[57]+ [01~04 group
[AAAA Arm
Time]+[BBBB Disarm
Time]+[Monday ~
[#]
E.g.: Set the first group timing arm at 22:00, timing disarm at 07:00,
from Monday to Friday are effectively.
1. Press [#] on the keypad and then press [57012200070012345#]
2. Remote calling the alarm panel, input [pa[#] to enter
setting status, then press [57012200070012345#]
3. Send SMS message [123457012200070012345#]
SMS Send ON/OFF
When Accessory’s
Battery Low
[0/1]: 0 means OFF,1 means On\N. Default is OFF
E.g. : Set SMS notification ON when battery of detectors is in low
voltage.
1. Press [#] on the keypad and then press [591#]
2. Remote calling the SIM card number, input [pa[#] to enter
setting status, then press [591#].
3. Send SMS message [12341234591#] “”
Command
：
[59]+[0/1]+[#]
Zone Type Setting
The alarm panel have 99 wireless zones and each zone can be used
as five types defense zone:
[01-99]: Zone numbers.
[1-5]: Zone type.
1: Normal Zone.
2: Stay Arm Zone.
3: Smart Zone.
4: Emergency Zone.
5: Close Zone.
[0/1]: 0 means siren not sound when alarm triggered.
1 means siren sound when alarm triggered.
E.g.: Set Zone 2 as Stay Arm Zone and siren not sound when alarm
triggered.
1. Press [#] on the keypad and then press [600220#]
2. Remote calling the alarm panel. Input [pa[#] to enter
setting status, then press [600220#]
3. Send SMS message [1234600220#]
Command
：
[60]+[01-99]+[1-
5]+[0/1]+[#]
Wired Zone NO/NC
Mode Setting
Zone 51~54 is wired zones, default setting is NO mode.
[0/1]: 0 means NO,1 means NC
E.g. : Set zone 51 into NC mode.
1. Press [#] on the keypad and then press [61511#]
2. Remote calling the alarm panel, input [pa[#] to enter
setting status, then press [61511#]
1. Send SMS message [123461511#]
Notes:
Zone 51=Wired zone 1 and labeled Z1 in the back panel
Zone 52=Wired zone 2 and labeled Z2 in the back panel
Zone 53=Wired zone 3 and labeled Z3 in the back panel
Zone 54=Wired zone 4 and labeled Z4 in the back panel
Command
：
[61]+[51-54]+ [0/1]+[#]
