background image

18  GB

Energy-Saving  

Under-Cabinet Light

Introduction

    Congratulations on your new product. 

You have selected a high quality product. 
Please read carefully and completely 

through these operating instructions. Fold out the 
page with the illustrations. These instructions form 
part of the product and contain important informa-
tion about bringing the product into use and its 
handling. Always observe all the safety advice. 
Check that the correct mains voltage is available 
and that all the parts have been properly assem-
bled before bringing into use. Should you have any 
questions or be uncertain as to how to operate the 
device, please get in touch with your dealer or ser-
vice point. Please keep these instructions in a safe 
place and hand them on to a third party if necessary.

Q

  

Proper use

This light is suitable only for interior use, in dry and 
enclosed spaces. The light should be positioned 
within reach so that the switch can be operated 
conveniently. The light can be fitted to all normally  
inflammable surfaces. Any use other than that  
described above or modification to the lamp is not 
permitted and may lead to damage to people or 
property. Moreover, there is the risk of injury or loss 
of life and that the lamp may develop technical 
faults such as short circuit or fire or give an electric 
shock. This lamp is intended for use only in a do-
mestic environment.

Q

 

Included items

Check that all the items and accessories are pre-
sent and that the lamp is in perfect condition  
immediately after unpacking.

1   Energy-saving under-cupboard light,  

Model 2592-014L or 2592-016L

1  T5 fluorescent tube, 13 W
1  Power cable
1  Connection cable
2 Dowels
2 Screws
1  Operating instructions

Q

 

Description of parts

1

 

Light connector socket 

2

 

ON / OFF  switch

3

 

Light body

4

 

Mounting holes for wall attachment

5

  Connecting socket

6

  Protective head guard

7

  Connecting cable

8

 

Mounting holes for underside attachment

9

 

Pivoting strip light

10

 

Protective glass cover

11

 

Bulb (fluorescent tube type)

12

 

Power cable

13

 Clip 

Q

 

Technical information

Operational  voltage: 

230 - 240 V ~ 50 Hz

Bulb: 

 

 T5 fluorescent tube type 
bulb,  13 W

Nominal  output: 

1 x 13 W

Dimensions: 

 (L x W x H) 
575 x 84 x 28 mm

Protection class: 

II 

Protection type: 

IP20

Q  

Safety

 

Safety advice

The right to claim under the guarantee shall be ren-
dered invalid in respect of damage caused by the 
non-observance of these operating instructions. No 
liability is accepted for consequent damage. No  
liability is accepted for damage to property or  

Introduction / Safety

Summary of Contents for 39584


























Reviews: