18 GB
Start-up / Changing the bulb / Maintenance and Cleaning / Disposal
Introduction / Safety
9 b
Decorative disc
10
Mains lead
11
ON / OFF switch
12
Socket head wrench (small)
13
Socket head wrench (small)
14
Socket head wrench (large)
15
LED lamp
Technical Data
Model no.:
14117401L / 14117406L
Operating voltage: 230–240 V∼ 50 Hz
Rated power:
1 x 7 W
Light bulb:
1 x LED lamp 7 W
Protection class:
II /
Safety
Safety information
Damage due to failure to comply with these operat-
ing instructions will invalidate the guarantee! We
assume no liability for consequential damage! We
assume no liability for material damage or personal
injury due to improper handling or failure to comply
with the safety instructions!
Avoid the risk of fatal injury
from electric shock
Check the light for damage every time before
you use it. Never use the light if it shows any
signs of damage.
CAUTION!
A damaged light means danger
of death from electric shock. In the event of
damage, repairs or other problems with the light
please contact the service centre or a qualified
electrician.
To prevent hazards, a damaged flexible outer
lead on this lamp must be replaced by the man-
ufacturer, its service representative or an equally
qualified professional!
Before use, verify the available mains voltage
corresponds with the operating voltage of the
lamp (230–240 V∼).
Ensure that the light does not come into contact
with water or other liquids under any circum-
stances.
Always unplug from the mains before assembling,
disassembling, cleaning, or if the lamp will not
be used for extended periods.
Never open any of the components of the elec-
trical equipment or insert any objects into the
same components. This will pose a risk of fatal
injury from electric shock.
This light is not suitable for dimmer
or electronic switches.
Prevent fire and
injury hazards
RISK OF INJURY!
Check every illuminant for
damage immediately upon unpacking. Do not
install the light if the illuminants are defective.
In this case contact the service centre for a re-
placement.
Do not look directly into the light source (light
bulb, LED etc.).
Do not leave the light or packaging material ly-
ing unattended. Plastic film or bags, plastic parts
etc. can turn into dangerous toys for children.
Do not cover the lamp or the mains plug with
objects. Excessive heat can result in a fire.
Never leave the lamp unattended whilst in use.
Safe working
Mount the light so that it is protected from mois-
ture and dirt.
Carefully prepare for assembly and allow your-
self adequate time. Organise all parts and any
necessary additional tools or materials before
starting so they are easy to reach.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Never assemble the lamp if you are unfocused
or feel unwell.
Summary of Contents for 14117401L
Page 3: ...1 2 3 15 4 5 6 7 8 10 11 9 14 13 12 9a 9b...
Page 4: ......
