1. Using a Phillips screwdriver (not included)
remove the screws and battery compartment
cover (1) located on the foam maker (C).
2. Install two (2) fresh D alkaline batteries (not
included), making sure the (+) and (-) ends
face the proper direction as indicated
inside the battery compartment.
3. Replace the compartment cover and
tighten the screws.
Tool required (not included)
1
Ready...batteries first!
Battery installation MUST be
completed by an adult:
1. Using a Phillips screwdriver (not included)
remove the screws and battery compartment
cover (1) located on the bubble blower (F).
2. Install four (4) fresh AAA alkaline batteries
(not included), making sure the (+) and (-)
ends face the proper direction as indicated
inside the battery compartment.
3. Replace the compartment cover and
tighten the screws.
C
F
Battery installation MUST be
completed by an adult:
1.5V D/LR20
1.5V D/LR20
5
