Little Giant 10E Series Manual Download Page 13

11

LIMITED WARRANTY

SUMP, EFFLUENT, & RESIDENTIAL SEWAGE

Little Giant #6E, #8E, #9E, #10E, #14EH, and #16EH Series Submersible 

Effluent Pumps are recommended for use in sumps, basins or lift stations and 

suitable for pumping basement drainage water, effluent, wastewater and other 

non-explosive, non-corrosive, non-abrasive liquids not above 140°F with up to 

3/4" spherical solids (1/2" on 6E models ) handling ability. (NOT TO BE USED 

FOR SEWAGE WATER EXCEPT TO PUMP SEPTIC TANK EFFLUENT.)
Little Giant #9S, #10S, #14S, and #16S Series Submersible Sewage Ejector 

Pumps are recommended for use in sumps, basins or lift stations and suit-

able  for pumping sewage, effluent, wastewater, and other non-explosive, 

non-corrosive, non-abrasive liquids not above 140°F with up to 2" spherical 

solids handling ability.
Little Giant 10SH Series Submersible Sewage Ejector Pumps are recommended 

for use in sumps, basins or lift stations and are suitable for pumping sewage, 

effluent, wastewater and other non-explosive, non-corrosive, non-abrasive liquids 

not above 140°F with up to 1-1/4" spherical solids handling ability.
Each of the above noted Little Giant products is guaranteed to be in perfect 

condition when it leaves our factory. During the time periods and subject to 

the conditions hereinafter set forth, LITTLE GIANT PUMP COMPANY, subsid-

iary of Franklin Electric Company, Inc., will repair or replace to the original user or 

consumer any portion of your new LITTLE GIANT product which proves defec-

tive due to materials or workmanship of LITTLE GIANT. Contact your nearest 

Authorized Little Giant Service Station for warranty service. At all times LITTLE 

GIANT shall have and possess the sole right and option to determine whether 

to repair or replace defective equipment, parts, or components. Damage due to 

lightning or conditions beyond the control of LITTLE GIANT is NOT COVERED 

BY THIS WARRANTY.

WARRANTY PERIOD
PUMPS:

 24 months from date of purchase or 30 months from date of manufac-

ture, whichever occurs first.

LABOR, ETC. COSTS:

 LITTLE GIANT shall IN NO EVENT be responsible or 

liable for the cost of field labor or other charges incurred by any customer 

in removing and/or affixing any LITTLE GIANT product, part or component 

thereof.

THIS WARRANTY WILL NOT APPLY:

  1. to defects or malfunctions resulting from failure to properly install, operate, 

or maintain the unit in accordance with printed instructions provided

  2. to failures resulting from abuse, accident or negligence
  3. to normal maintenance services and the parts used in connection with such 

service

  4. to units which are not installed in accordance with applicable local codes, 

ordinances and good trade practices

  5. if unit is used for purposes other than for what it was designed and 

manufactured

  6. If pump exposed to but not limited to the following: sand, gravel, cement, 

grease, plaster, mud, tar, hydrocarbons, or hydrocarbon derivatives (oil, 

gasoline,solvents, etc.) or other abrasive or corrosive substances

  7. if pump has been used for continuous pumping of suitable liquids above 

140°F.

  8. if cord cut off to a length less than 3'
  9. if pump has been dismantled by customer. (Authorized Little Giant Service 

Stations only can dismantle pump for field service.)

RETURN OR REPLACED PRODUCT:

 Any product to be replaced under the 

Warranty must be returned to LITTLE GIANT at  Oklahoma City, OK or such 

other place as LITTLE GIANT may designate, freight prepaid.

PRODUCT IMPROVEMENTS:

 LITTLE GIANT reserves the right to change or 

improve its products or any portions thereof without being obligated to provide 

such a change or improvement for units sold and/or shipped prior to such 

change or improvement.

DISCLAIMER:

 Any oral statements about the product made by the seller, the 

manufacturer, the representatives or any other parties, do not constitute war-

ranties, shall not be relied upon by the user, and are not part of the contract 

for sale. Seller’s and manufacturer’s only obligation, and buyer’s only remedy, 

shall be the replacement and/or repair by the manufacturer of the product as 

described above. Neither seller nor the manufacturer shall be liable for any 

injury, loss or damage, direct, incidental or consequential (including, but not 

limited to, incidental or consequential damages for lost profits, lost sales, injury 

to person or property, or any other incidental or consequential loss), arising out 

of the use or the inability to use the product, and the sure agrees that no other 

remedy shall be available to it. Before using, the user shall determine the suit-

ability of the product for his intended use, and user assumes all risk of liability 

whatsoever in connection therewith. The warranty and remedy described in 

this limited warranty is an EXCLUSIVE warranty and remedy and is IN LIEU OF 

any other warranty or remedy, expressed or implied, which other warranties 

and remedies are hereby expressly EXCLUDED, including but not limited to 

any implied warranty of MERCHANTABILITY OR FITNESS FOR A PARTICULAR 

PURPOSE. Some states do not allow the exclusive or limitation of incidental or 

consequential damages, so the above limitation or exclusion may not apply to 

you. This warranty gives you specific legal rights, and you may also have other 

rights which vary from state to state.

In the absence of other suitable proof of the purchase date, the effective date of 

this warranty will be based upon the date of manufacture plus two years. Direct 

all notices, etc. to: Service Department, LITTLE GIANT PUMP COMPANY, 301 

N. MacArthur, Oklahoma City, OK 73127-6616.

DETERMINATION OF UNIT DATE OF MANUFACTURE:

 (9-87) month and 

year stamped on pump and/or serial number on pump nameplate coded to 

indicate year of manufacture.

GARANTIE LIMITÉE

POMPE À PUISARD, À EFFLUENT 

ET À EAUX D’ÉGOUT DOMESTIQUE

Les pompes submersibles à effluent des séries 6E, 9E, 10E, 14EH et 16EH sont 

recommandées pour des puisards, des réservoirs ou des bassins de transfert. 

Elles conviennent également pour le pompage de l’eau de drainage de sous-

sols résidentiels, de l’effluent, des eaux usées ou d’autres liquides qui ne sont 

ni explosifs, ni corrosifs et ni abrasifs, dont la température ne dépasse pas 140° F 

et qui peuvent comporter des solides sphériques allant jusqu’à 3/4 po de diamètre 

(1/2 po pour les modèles 6E). (NE PAS UTILISER POUR DES EAUX D’ÉGOUT, 

SAUF POUR L’EFFLUENT D’UNE FOSSE SEPTIQUE.)
Les pompes submersibles à éjecteur pour fosse septique Little Giant des séries 

10S, 14S et 16S sont recommandées pour des puisards, des réservoirs ou 

des bassins de transfert. Elles conviennent également pour le pompage des 

eaux d’égout, de l’effluent, des eaux usées ou d’autres liquides qui ne sont 

ni explosifs, ni corrosifs et ni abrasifs, dont la température ne dépasse pas 

140° F et qui peuvent comporter des solides sphériques allant jusqu’à 2 po de 

diamètre.
Les pompes submersibles Little Giant de la série 10SH à éjecteur pour fosse 

septique sont recommandées pour puisards, bassins ou réservoirs de transfert. 

Elles conviennent également au pompage des eaux d’égout, de l’effluent, des 

eaux usées ou d’autres liquides qui ne sont ni explosifs, ni corrosifs et ni abrasifs, 

qui peuvent comporter des solides sphériques allant jusqu’à 1-1/4 po de diamètre 

et dont la température ne dépasse pas 140 ° F.
La présente garantit que chaque produit Little Giant sus-mentionné est en parfaite 

condition à sa sortie de l’usine. Pour la durée et selon les conditions mention-

nées dans les présentes, LITTLE GIANT PUMP COMPANY, filiale de Franklin 

Electric Company, Inc., réparera ou remplacera au profit de l’acheteur ou de 

l’utilisateur initial toute partie du produit LITTLE GIANT qui, à cause d’un défaut 

de matériau ou de fabrication, sera défectueuse. Communiquer avec le détaillant 

LITTLE GIANT le plus près de chez vous pour des réparations sous la garantie. 

La réparation ou le remplacement de l’appareil, des pièces ou des composantes 

se fera à la seule discrétion de LITTLE GIANT, et ce en tout temps. Les dommages 

dûs à la foudre ou à des circonstances hors du contrôle de LITTLE GIANT NE 

SONT PAS COUVERTS PAR LA PRÉSENTE GARANTIE.

DURÉE DE LA GARANTIE
POMPES :

 24 mois à partir de la date d'achat, ou 30 mois à partir de la date de 

fabrication, selon le premier terme atteint.

FRAIS DE MAIN-D’ŒUVRE, ETC. :

 EN AUCUN CAS, LITTLE GIANT ne peut 

être tenue responsable des frais de main-d’œuvre sur place ou de tout autre 

frais contracté par le client lors de l’enlèvement ou de l’installation (ou des deux) 

de tout produit ou pièce dudit produit LITTLE GIANT.

LA PRÉSENTE GARANTIE NE S’APPLIQUE PAS :

  1. aux défauts ou défectuosités résultant d’une installation, d’une utilisation 

ou d’un entretien non-conforme aux instructions incluses avec le produit

  2. aux défectuosités résultant d’une mauvaise utilisation, d’un accident ou de 

négligence

  3. à l’entretien normal et aux pièces nécessaires à cet entretien
  4. aux appareils qui n’ont pas été installés conformément aux codes et règle-

ments locaux ainsi qu’aux règles de l’art

  5. à un appareil utilisé dans un but autre que celui dans lequel il fut conçu et 

fabriqué

  6. à une pompe qui a été exposée, entre autres, aux matières suivantes : 

sable, gravier, ciment, graisse, plâtre, boue, goudron, hydrocarbones et 

leurs dérivés (huile, essence, solvants, etc.) ou autres substances abrasives 

ou corrosives

  7. à une pompe utilisée pour pomper sans interruption des liquides non dan-

gereux à des températures dépassant 140° F

  8. le fil d’alimentation a été coupé à une longueur inférieure à 0,91 m (trois 

pieds);

  9. à une pompe démontée par l’utilisateur. (Seul le détaillant est habilité à 

démonter la pompe sur place.)

RETOUR DE PIÈCES À REMPLACER :

 Toute pièce qui doit être remplacée 

conformément à la garantie doit être retournée port payé à l’entreprise LITTLE 

GIANT à Oklahoma City, Oklahoma U.S.A. ou à tout autre endroit désigné par 

LITTLE GIANT.

AMÉLIORATIONS DE PRODUITS :

 LITTLE GIANT se réserve le droit de modi-

fier ou d’améliorer ses produits ou toute partie de ces derniers sans être tenue 

d’apporter ces modifications aux appareils vendus ou expédiés auparavant.

DÉNÉGATION :

 Toute déclaration sur la pompe faite oralement par le vendeur, 

le fabricant, le représentant ou par toute autre partie ne constitue pas une 

garantie et, par conséquent, ne peut ni servir à l’utilisateur ni faire partie du 

contrat de vente. L’unique obligation du vendeur et du fabricant, et l’unique 

Summary of Contents for 10E Series















Reviews: