13
ENG
When content of memory cell is displayed,
date and time of measurement are displayed
alternately in the display top line. Each
depression of button MEM1 (or МEM2)
causes shifting to the next memory cell.
If no measurement results are stored in the
memory and МEM1 (or МEM2), buttons are
pressed for the fi rst time, current date and
time will be displayed.
MEMORY CLEARING
To delete all values stored in the memory, press the МEM1 (or МEM2) Button and
hold it down for more than 3 seconds. Symbols “Clr” will appear on the screen and
all values will be deleted from the memory.
Measurement results (pressure, pulse, time and date of measurement) kept in the
device memory even without power elements.
INFORMATION ABOUT ERRORS
Indication
Likely cause
Methods of correction
The arm cuff is applied
incorrectly or the air tube plus is
inserted not tightly enough.
Measurements cannot be made
due to hand movement or
talking during measurements
.
Be sure that the arm cuff is
applied correctly and the plug is
inserted tightly. Repeat the whole
measurement procedure.
Repeat the measurement following
strictly the recommendations of this
Manual.
Batteries are discharged.
Replace the batteries for new ones.
Fig.
18
