11
ENG
MEASUREMENT PROCEDURE
1.Insert the Air Tube Plug into the Cuff Jack. Make 3-5 deep inhales and exhales
before taking a measurement and relax. Do not move, do not speak and do not
toughen your arm.
2. Press «START».
3. Press button MEM1 or MEM2 to set up the value of infl ation
pressure (189, 210, 240, 270, 300 mm Hg). The selected
values are saved on default for further measurement. To
fi nish setting press button “START”. Should no button be
pressed for the period of 3 sec., the device will automatically
start measuring with reference to the current value of
infl ation pressure. Do not move, do not speak and do not
toughen your arm during measurement.
4. All symbols will appear on the display screen for a short time, two short sound
signals will be given and the Device will infl ate automatically the air into the cuff .
5. On achieving a selected value, the cuff infl ation pressure will gradually go
down. The fi gures on the screen will count back. The pulse symbol «
» will
start fl ickering (fi g. 14).
AS THE BLOOD PRESSURE AND PULSE ARE MEASURED DURING AIR DEFLATION
FROM THE ARM CUFF KEEP QUIET AND DO NOT MOVE YOUR ARM AND DO NOT
TOUGHEN YOUR ARM MUSCLES.
6. When the measurement is complete the sound signal is given,
the arm cuff completely deflates and your measurement
results fl ash on the screen (fi g. 15).
If irregular pulse rhythm is detected during measurement,
symbol of arrhythmia «
», will appear upon measurement
end. Appearance of arrhythmia indicator may also be caused
by body movement during measurement. During periodical
appearance of this indication apply to You attending doctor.
Apart from numerical value of pressure, result is also displayed
on scale WHO (fig. 16). Scale WHO – three-color scale of
classifi cation of received value of arterial pressure, according
to recommendation of World Health Organization. The scale is
available from the left.
7. Symbols «
» is blinking on display, reminding that to
retain results, it is necessary to choose memory 1 or 2,
having depressed МEM1 or МEM2. Press МEM1 (or МEM2)
to retain results.
8. Press «START» to switch over to mode of date and time
indication.
TO OBTAIN THE ACCURATE RESULT MAKE INTERVAL BETWEEN MEASUREMENTS
TO RESTORE THE BLOOD CIRCULATION. WAIT FOR AT LEAST 3 MINUTES BEFORE
MAKING A NEW MEASUREMENT.
Fig.
15
Fig.
14
M
D
Fig.
13
