Z8F3224 ZMOTION Development Kit
UM029501-0321
User Manual
8
•
Up to 30 interrupt sources with up to 23 interrupt vectors
•
On-Chip Debugger (OCD)
•
Power-On Reset (POR) and Voltage Brown-Out (VBO) protection
•
Built-in Low-Voltage Detection (LVD) with programmable voltage threshold
•
Low Frequency Crystal Oscillator (LFXO) operating at 32.768 kHz with low power
consumption
•
Internal clock sources and clock multiplication including: Internal Precision Oscillator (IPO),
Digitally Controlled Oscillator (DCO), Watchdog Timer Oscillator (WTO) and Frequency
Locked Loop (FLL)
•
Wide operation voltage range: 1.8 V
–3.6 V
•
20- 32-, and 44-pin packages
•
–40°C to +85°C (extended) operating temperature range
Getting Started
Download and install the ZMOTIONL400ZCOG_1.0 installation file from the
Software Download > Software Development Software. This will create a folder that includes the VCOM
USB driver, reference schematics, sample applications, ZMOTION Engine Library, and related
documentation. Version 1.0 is the latest version of the installation file when the kit was released. Later
versions of the file may be available.
After installation the following folders will be created:
\Zilog\ZMOTIONL400ZCOG_1.0
Documentation
Drivers
Z8F3224 ZMOTION Library
Reference Schematics
Sample Applications
ZMOTION Engine Library
The development board comes with two Z8F3224QN020XK2258 MCUs that are pre-programmed with
sample applications to demonstrate basic motion detection. These projects, and others are included in
the Sample Applications folder.
•
The LP MCU is pre-programmed with the ZM_LP_Basic application.
•
The NP MCU is pre-programmed with the ZM_NP_Basic application.
Note:
The 2258 suffix is a specific version of the Z8F3224 MCU series that supports the ZMOTION Library.
Devices without the 2258 suffix do not support the ZMOTION Library
