Page 19
When you operate the “Joystick” down to the “MENU” direction, you will enter the “Sub
menu” group name setting screen. There will have the following menu group name:
#Sub menu… System: Controls global system parameters for the system unit.
When you operate the “Joystick” to the left direction, you may scroll down to select and
modify (press the push button in the centre of the multi-directional joystick switch) the
following menu group accordingly.
#Adjust Resolutions: Controls unit’s input/output resolution table. (hidden by default –
only visible when “Advanced menus” are switched as [ON])
WARNING: Adjust this function with care. DO NOT ADJUST THESE ITEMS UNLESS YOU’RE
CERTAIN YOU KNOW WHAT YOU’RE DOING! THE ONLY METHOD TO UNDO CERTAIN
CHANGES IS TO UPDATE THE FIRMWARE.
TRY USING THE AUTOSET, SHRINK, SHRINK POS, TL & BR ADJUSTMENTS FIRST
#Adjust Ethernet: Controls IP addresses and network parameters
#Adjust Button: Allows CC-300 buttons to be programmed to match the unit
#Adjust Sources: Controls signal source input parameters
#Adjust Windows: Controls characteristics of the PIP windows
#Adjust Outputs: Controls output parameters
#Advanced menus: [ON] / [OFF]
#Adjust Present: [Load] / [Store] / [Erase]
You may also refer to the TVone C2-2000 series video processor operation manual for
detail information as supplied.
