20/30
5.5.
Rinse waste water suction
Note
The system must be flushed with water before switching off the waste water suction. This
prevents sludge sticking in the hoses and hose pump.
Vacuum clear water
Flush until the exhaust hose (pos. 6) is running clear water
5.6.
Clean the coarse filter sieve in the dirty water container
Note
Regular control of the collection container. Stones may block the sieve and negatively influence
water flow.
Open the locking of the dirt collection container (Pos. 7)
Swing cover open of the dirt collection container (Pos. 8)
Remove the coarse filter sieve from the dirty water container (Pos. 8)
Note
Do not knock the coarse filter sieve against the floor! To remove stubbornly attached materials, it
is enough to gently tap the filter and rinse it out with water.
Clean the coarse filter sieve and insert again (remember the latch)
Close cover of the dirt collection container (Pos. 8) and engage the locking of the dirt
collection container (Pos. 7)
8
7
