13/30
1.6.
Transport
1.6.1
To implement using a crane, slinging equipment with sufficient load carrying capacity must be
used. Slinging equipment must be checked for damage before use.
1.6.2
Name expert instructors for the lifting process!
1.6.3
Only use suitable transport vehicle with sufficient load capacity!
1.6.4
Secure loads reliably according to the regulations. Use suitable attachment points!
1.6.5
When recommissioning, follow the operating manual!
1.7.
Packaging and Storage
To ensure sufficient protection during shipping and transport, the machine and its components are
carefully packaged. When receiving the machine, the machine should be checked for damage. The
packaging of the device consists of materials which can be recycled. Put these by type into the
relevant recycling containers, so that they can be recycled properly.
In the case of damage, the machine must not be put into operation. Even damaged cable and plugs
represent a safety risk and must not be used. In this case, please contact the manufacturer.
If the machine is not immediately put into operation after unpacking, it must be protected from
moisture and dirt.
1.8.
Environmental protection
Packaging material, cleaning agents, used or residual operating materials, as well as removed
wear parts, such as drive belts or motor oils must be taken to recycling corresponding to the valid
regulations for environmental protection at the place of use.
1.9.
Disposal
If the expiry date of the device has been reached, in particular if functional errors happen, make
the used machine unusable.
Dispose of the device according to the valid regulations for environmental protection of your
country. Electrical waste may not be disposed of in household waste. Take the used device to a
central rubbish collection centre.
