Lissmac ATS 450, Operating Manual

Page: 14 / 44

14/44
1.6. Transport
Only use a suitable transport vehicle with an adequate load capacity.
Secure the load properly in compliance with the regulations. Use suitable lashing points.
Disconnect the machine from the energy supply even if you only wish to move it slightly.
Reconnect the machine to the mains supply properly before restarting it.
Proceed as described in the operating manual to restart the machine.
1.7. Packaging and storage
To ensure adequate protection during shipment and transport, the machine and its components
have been carefully packed. On receipt of the machine you should check it for signs of damage.
The machine's packaging consists of recyclable materials. Please sort them into different
materials and place them in the appropriate containers so that they can be recycled.
Do not start the machine if it is damaged. Damaged cables and plug connectors also pose a safety
risk and must not be used. In this case notify the manufacturer immediately.
If the machine is not to be started straight away after being on impact, it must be protected from
moisture and dirt. Unused tools must be protected from moisture. The segments installed around
the saw blade must be protected from damage.
1.8. Environmental protection
Packaging material, cleaning products, used or residual media and unpacked wearing parts such
as drive belts or motor oil must be recycled in accordance with the environmental protection
regulations in force at the place of use.
1.9. Waste disposal
When the device reaches its end of life, particularly if it starts to malfunction, render it inoperable.
Dispose of the device in accordance with the environmental regulations that apply in your country.
Electrical waste must not be disposed with household waste. Deposit the end-of-life device at a
central collection point.