Rev: 01.20.22
Page 7
CCD-0004551
Fig. 4
A
Starboard
Boat Railing
Starboard Actuator
Note:
Actuator wire harness not shown for clarity.
Fig. 5
Port Actuator
A
Port Boat Railing
Note:
Actuator wire harness not shown for clarity.
Without Touch Controller
Nose Mount Caps
Install the Lippert QC Power Bimini system per steps 1-12 of the With Touch Controller section and as
follows:
Note:
The Nose Mount Caps are part of the complete system frame, but requires attachment to the
boat's railings.
1.
To install the Nose Mount Caps, remove the protective cap over the cap's mounting screw (Fig. 5A).
2.
Carefully tuck excess actuator wires into the open end of the actuator.
