Rev: 01.20.22
Page 23
CCD-0004551
Fig. 35
Fig. 36
A
B
2.
To disconnect and unpair the iOS smart device from the connected controller, do as follows:
A. With the app open to the
Raise
and
Lower
button screen (Fig. 35), tap the gear icon (Fig. 34C) to
access the Settings screen (Fig. 35).
B. Tap the slider button (Fig. 35A) to turn Auto-Reconnect on so the smart device will always
automatically reconnect with the controller.
C. Tap the slider button again to turn Auto-Connect off.
D. Tap the Unpair button (Fig. 35B) for the paired/connected shade.
E. The Paired Shades screen (Fig. 36A) will reflect the removed shade.
F. Tap the Back arrow (Fig. 36B) to return to the Connect screen (Fig. 31).
B
A
Without Touch Controller
If the bimini system is connected to a helm switch, use the switch to raise and lower the bimini top:
1.
Press and hold the switch until the top is fully extended or retracted and the actuators stop.
2.
Release the switch.
Following the testing of installed components:
1.
Fully retract the bimini top.
2.
Turn off electrical power to the boat.
3.
Install the protective boot.
