Rev: 01.20.22
Page 3
CCD-0004551
The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause
death or serious personal injury and/or severe product or property damage if not performed safely
and within the parameters set forth in this manual.
Failure to follow instructions provided in this manual may result in death, serious personal injury
and/or severe product and property damage, including voiding of the component warranty.
The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury
and/or product or property damage if not safely adhered to and within the parameters set forth
in this manual.
Always wear eye protection when performing service, maintenance or installation procedures.
Other safety equipment to consider would be hearing protection, gloves and possibly a full face
shield, depending on the nature of the task.
All electrical wiring harnesses shall be loomed and secured to prevent possible damage and
installed in accordance with the latest ABYC (American Boat and Yacht Council) electrical standards,
Only open the bimini top indoors when testing for proper installation. Opening the bimini top
outdoors subjects the system to possible strong winds that could result in severe product damage.
Only open the bimini top indoors when testing product for proper operation.
Do NOT fully open the bimini frame without the canvas top installed when testing product for
proper operation. Opening the bimini frame without the canvas top installed will result in severe
product damage. Only fully open the bimini frame with the canvas top installed.
Resources Required
• 1-2 persons, depending on task
• Pencil
• Cordless or electric drill or screw gun
• 3/8" drill bit
• Appropriate drive bits
• Tape measure
• 9/16" wrench
• Screwdriver
