3. If you have O gauge track, take a moment to install the wire adapters on your OTC
Contactor. These adapters will raise the control blades to the proper height. As illustrated in
Figure 13, simply insert the short end of the adapter into the control blade until the long
end lies flatly on top of the blade.
This step is not necessary if you have O-27 gauge track.
33
Figure 13. Attaching the wire adapter
Note!
OTC Contactor
0 gauge
Adapter
Setting up the Corral and OTC contactor (continued)
Maintaining and servicing your set
Summary of Contents for 2269W B & O Diesel Freight
Page 39: ...Notes 39 ...